FLEXIBLE EXTENSION – 13”
Contact us for prices
Push-on flexible grease extension – 330mm
(13”). Can be used to temporarily extend
existing rigid or flexible extensions
Produits associés
RIGHT ANGLE COUPLER
Push-on right-angle coupler – Standard
temporary attachment for greasing in tight
areas where access by a standard coupler
isn’t available.
POWERPISTOL™ 400G (14OZ) AIR OPERATED GREASE GUN
TECHNICAL SPECIFICATIONS
• Delivery pressure up to 414BAR / 41,400kPa (6,000psi)
• Single shot per trigger pull, up to 0.7g per shot
• Min/Max air pressure: 2.75BAR / 275kPa (40psi) / 8.27BAR
830kPa (120psi)
• Minimum compressor size: 0.026m3/min (1 cfm)
• Air inlet: ¼” NPT
• 400g (14oz) cartridge or bulk fill
• 230mm (9”) Flexible high pressure extension hose
• SUPERGRIP™ high pressure grease coupler
• Heavy duty 1.6mm (0.06”) thick barrel, robust zinc pull handle
• Wetted parts: aluminium, steel, nitrile rubber, cork and nylon
• Maximum viscosity: Up to NLGI 2
EXTENSION HOSE – 2.5M X 6MM
EXTENSION HOSE – 2.5M X 6MM
2.5m x 6mm (8’ x ¼”) i.d. high pressure grease
delivery hose. ¼” NPT (M) on both ends
BOOSTER GUN
BOOSTER GUN • Delivery pressure up to 827BAR / 82,700kPa (12,000psi) • Used for high pressure delivery with any air-powered grease pump • Increases the inlet grease pressure to overcome line resistance or nipple blockages • ¼” NPT(F) inlet
SUPERLUBE GREASING SYSTEM
TECHNICAL SPECIFICATIONS
• High volume delivery pressure up to 345BAR / 34,450kPa
(5,000psi)
• High pressure delivery pressure up to 689BAR / 68,900kPa
(10,000psi)
• Provides up to 60 shots of grease with each prime
• Up to 0.45g (0.015oz) per shot (High pressure setting)
• Up to 1.25g (0.044oz) per shot (High volume setting)
• Pail size range: 16 – 25kg (35 – 55lb)
• Maximum viscosity: Up to NLGI 2
• Wetted parts: aluminium, steel, nitrile rubber
• 3m (10’) Flexible delivery hose
• KY: SUPERGRIP™ high pressure grease coupler
FLEXIBLE EXTENSION – 17”
Flexible grease extension – 430mm (17”).
Suitable for both hand or powered greasing
equipment; ⅛” NPT (M) fittings on both ends
POWERLUBE™ AND MAXILUBE™ AIR OPERATED GREASE PUMPS
TECHNICAL SPECIFICATIONS
• 50:1 pump ratio
• Maximum pump output pressure: 517BAR / 51,700kPa (7,500psi)
• Maximum gun output pressure: 689BAR / 68,900kPa
(10,000psi)
• Output: 460g/min (16oz/min) (at pump)
• Grease viscosity up to NLGI 2
• Wetted components: zinc, hard chrome-plated carbon steel,
brass, nitrile and polyurethane rubber
• Maximum air pressure: 10.3BAR / 1034kPa (150psi)
• Minimum air pressure: 4.13BAR / 413kPa (60psi)
• Air inlet: ¼” NPT (F), Pump outlet: ¼” NPT (F)
• Minimum compressor size: 0.08m³/min (3 cfm)
• B2 Booster gun and 4m (13’) grease hose included
Avis
Il n’y a pas encore d’avis.