Description
Description
ER Register Bracket suitable for MAN1915-01 Heavy Duty Oil/Water Reel.
ER REGISTER BRACKET
Contact us for prices
Description
ER Register Bracket suitable for MAN1915-01 Heavy Duty Oil/Water Reel.
Produits associés
AIR/WATER REEL 10mm x 30m – lubemate
Technical Specifications
- Air/Water 10mm x 30m retractable hose reel
- Positive hose latch- locks yours hose at any length
- Easy to carry – A convenient handle makes the reel easily portable
- Built-in hose layering mechanism – hose rewinds safely with no bunching or kinks
- 180° Swivel bracket – the hose follows your direction as you move around
- UV stablised hose and case – the hose is ready for Australia’s toughest environmental conditions
- Ready to go – the hose reel comes complete with a 2m feeder hose, fittings and mounting bracket
- Working pressure – 174psi (12bar)
SINGLE PEDESTAL GREASE REEL 6mm x 15m
Technical Specifications
- Fitted with 15m x 6mm i.d. SAE100 R2 rubber hose
- Operating pressure up to 34,500 kPa (5,000 psi)
- 1/4″BSP(F) reel inlet and 1/4″ BSP(M) hose outlet
- Wall / floor mounting bracket integral to the reel design
TWIN PEDESTAL GREASE REEL 9mm x 15m
Technical Specifications
- Fitted with 15m x 9mm i.d. hose
- Operating pressure up to 34,500 kPa (5,000 psi)
- 3/8″ BSP(F) reel inlet and 3/8″ BSP(M) hose outlet
- Wall / floor mounting bracket integral to the reel design
SERVICE VEHICLE OIL REEL 19mm x 15m
Technical Specifications
- Ideal for mine site service vehicle mount & mine applications
- Supplied fully assembled
- Fitted with 19mm x 15m i.d. hose
- Clear 17mm digit display for ease of use
- Flow rates between 3 and 80LPM
- Stainless steel shaft, zinc plated housing & Viton O’rings
- Operating pressure up to 8,600kPa (1,200psi)
- 3/4” BSP(F) reel inlet c/w 1m feeder hose and ¾” BSP(M) hose outlet
- Hose guide and arm positions can be altered to suit various mountings
AIR/WATER REEL 10mm x 14m
Technical Specifications
- Air/Water 10mm x 14m retractable hose reel
- Positive hose latch – locks yours hose at any length
- Built-in hose layering mechanism – hose rewinds safely with no bunching or kinks
- 180° Swivel bracket – The hose follows your direction as you move around.
- UV Stabilised hose and case – The hose is ready for Australia’s toughest environmental conditions.
- Working pressure: 174psi (12bar)
DIESEL/WATER/AIR HOSE REEL UNMETERED (BARE) 38mm x 15m
Technical Specifications
- Nominal Size: 1 1/2″
- Fluid Type: Diesel/Water
- Swivel Working Pressure: 350psi
- Shaft Material: Stainless Steel
- O’ring Material: Viton
- Housing Material: Zinc coated
- Hose Capacity: 15m x 1 1/2″
- Reel Inlet: 1 1/2″ NPT
- Feeder hose: No
TWIN PEDESTAL AIR/WATER REEL 12mm x 20m
Technical Specifications
- Fitted with 20m x 12mm i.d. hose
- Operating pressure up to 2,100 Kpa (300 psi)
- Maximum operating temperature 60°C
- 1/2″ BSP(F) reel inlet and 1/2″ BSP(M) hose outlet
- Wall / floor mounting bracket integral to the reel design
Avis
Il n’y a pas encore d’avis.